• 제품 카다로그
  • 전시회

top

Grau

> Produto > Grau

PC2005 / PC2010 / PC2015

    Laser Mill Series
    New Laser Mill series for high hardness steel and for universal purpose covering
    all the die steel

  • PC2005 / PC2010 / PC2015
  • KF / KH Chip Breaker
PC2005 (For high hardness workpiece and press die steel)
  • Super high hardness substrate and coating improve wear resistance dramatically.

PC2010 (For pre hardened steel and plastic die steel)
  • Ultra fine WC and high contents cobalt were applied to the substrate to expand application range to high hardness steel and pre hardened steel.

PC2015 (Exclusive for Laser Mill for machining cast iron and carbon steel)
  • High toughness substrate based grade for general cutting of cast iron and HRSA with the use of lubricative coating layer.

Features of KF / KH Chip Breaker
  • KF : Exclusive chip breaker for stable machining of carbon steel with its characteristics of high wear resistance at center part and improved blade design.
  • KH : Stronger insert with the combination of rake angle and relief angle that are ideal for machining high hardness workpiece.
Application Guideline per Workpiece

  • PC2005-KH: Ideal for machining heattreated steel and high hardness steel with its characteristics of excellent wear resistance and the harmony between improved blade design and strong chip breaker.
  • PC2010-KH: Ideal for machining pre hardened steel with its characteristics of the harmony between excellent thermal shock resistance and strong cutting edges.
  • PC2015-KF: Ideal for machining carbon steel with its characteristics of the harmony between excellent welding resistance and strong cutting edges/chip breakers.
Recommended Cutting Conditions
선정기준
Workpiece Grade Chip
breaker
Recommended cutting conditions
ISO Material HB(HRC) vc(m/min) fz(mm/t) ap(mm) ae(mm)
K Gray cast iron GC250 180(8) PC2015
PC2010
PC2005
KF 130~210 0.2~0.5 0.07D 0.07D
Ductile cast iron GCD600 250(24)
P Carbon steel S20C~S50C 150 170~250 0.2~0.5 0.07D 0.07D
Alloy steel SCM21~SCM5H 270(28) PC2010
PC2015
PC210F
KH 130~210 0.1~0.3 0.7D 0.7D
Pre
hardened
steel
KP4M 300(32) 100~160 0.1~0.3 0.5D 0.5D
NIMAX 370(40)
CENA1 370(40)
NAK80 400(43)
STAVAX 510(52)
High speed
tool steel
SKH51 ~ SKH59 550(55) PC2005
PC2010
KH 80~130 0.1~0.2 0.3D 0.3D
Alloy tool
steel
STD61
(Hot forged)
630(60) 70~120 0.1~0.2 0.3D 0.3D
STD11
(Cold forged)
  • When the overhang is over 3D, adjust the feed and cutting speed down as the following table.
Overhang vc(m/min) fz(mm/t)
Under 3D 100% 100%
3D ~ 5D 70% 70%
5D ~ 8D 60% 60%
8D ~ 10D 50% 50%
제품카탈로그 카다로그 동영상