• 제품 카다로그
  • 전시회

top

Grau

> Produto > Grau

PC8105 / PC8110 / PC8115

    A Solution for Machining Hard-to-cut Materials

  • PC8100 Series
  • H01 / H05
  • VP Series Chip Breaker
Troubles when Machining Hard-to-cut Materials

Development of PC8100 Series

Development Effect

H01 / H05 - Exclusive Grade for Machining Titanium Alloy

Troubles when Machining Titanium and Development Effect

Features of VP Chip Breakers

Features of VP Chip Breakers
VP1 (For finishing-continuous cutting)

Cutting edges designed in high-positive
Reduced contact area between rake surface and chip minimizes cutting heat and improved tool life.

Recommended cutting conditions
fn(mm/rev) = 0.05~0.2, ap(mm) = 0.1~1.5

VP2 (For medium cutting to finishing)
VP2 (For medium cutting to finishing)

Cutting edges designed in high-positive / Side rake angle applied
Stable chip control improves machinability when ball machining at variable depth of cut.

Recommended cutting conditions
fn(mm/rev) = 0.1~0.4, ap(mm) = 0.5~4.5

VP3 (For medium cutting)
VP3 (For medium cutting)

Cutting edges designed in high-positive / Wide land applied
Improved stability at interrupted cutting when toughness is required. Stable chip control and machinability at high depth of cut.

Recommended cutting conditions
fn(mm/rev) = fn(mm/rev) = 0.1~0.45, ap(mm) = 0.5~5.0

Chip Breaker Line-up [ Heat resistant alloy and stainless steel ]

Chip Breaker Line-up [ Titanium alloy ]

Grade Line-up

제품카탈로그 카다로그 동영상